
GR12 Titanium Rods for Chemical Equipment Parts
Bar Sizes: Diameters from 6 to 200 mm and lengths up to 3,000 mm. Other dimensions by agreement.
Processing & Appearance: Rolled round bar with a machined surface.
Fabrication Direction: Solid stock for turning, drilling and machining chemical equipment components.
Purchase Standards: ASTM B348 or GB/T 2965-2023, with the specified grade and material condition.
Packing: Selected for the bar dimensions and customer handling requirements.
Minimum Quantity: 10 kg. Price depends on size, delivery condition, testing and order volume.
Bar Stock for New Builds and Maintenance
GR12 titanium rods are supplied for manufacturing individual parts within chemical-processing equipment. Where the engineering specification calls for this alloy, round stock can be machined into valve stems, bushes, studs and other equipment hardware.
Unlike a vessel lining or heat-exchanger tube, these parts may need precise fits, threads or bearing surfaces. The purchase requirement therefore starts with the component drawing and the material needed to produce it.
Specify the Part Before Selecting the Blank
For stepped components, identify the largest diameter and finished length. For bored parts, include the required wall section and internal features. Surface finish, dimensional accuracy and machining allowance should reflect the finished function.
When replacing an existing part, confirm its original material designation and operating duty. A matching diameter is not sufficient grounds for substituting GR12.
Where the Alloy Adds Value
GR12 contains small molybdenum and nickel additions that improve resistance to certain corrosive conditions, particularly crevice attack in hot chloride environments compared with unalloyed titanium.
This makes it a material to assess for process-contact hardware where both mechanical requirements and chemical exposure matter. It is not a universal choice for acids, alkalis or mixed process liquids.
For enquiry review, provide the component specification, fluid composition, operating temperature and any required material records. Bar acceptance tests and finished-part inspection should be identified separately. Additional examination or third-party verification is agreed before production.
GR12 Titanium Rods for Chemical Equipment FAQ
What information is needed to quote GR12 bar for a valve stem?
Provide the finished drawing, largest diameter, overall length and material specification. Identify threads, sealing surfaces and any required heat-treatment condition. The machining supplier should establish the blank dimensions and allowances needed to produce the part.
How should I specify material for a bush exposed to process liquid?
Include the bore, outside diameter, wall thickness and required fit. Describe the mating part, contact movement and process exposure. The design review should address chemical compatibility alongside loading, wear and the clearance required during operation.
Can I order GR12 using measurements taken from a worn replacement part?
Use the approved drawing and original material records wherever available. Wear, corrosion or deformation may have changed the measured dimensions. Confirm the intended finished geometry and material requirements before establishing the bar size for the replacement.
What process details matter for hardware installed inside chemical equipment?
Identify the liquid composition, temperature, contact duration and locations where fluid can remain trapped. Include cleaning solutions and changes during startup or shutdown. These details help assess the proposed alloy for the local conditions around threads, seals and mating surfaces.
Which inspections belong to the bar order and which belong to the finished part?
The bar order can define chemical analysis, mechanical properties, dimensions and any agreed internal examination. Finished-part inspection follows the component drawing and may include fits, threads, surface finish and other functional features. Establish both scopes before manufacture so the required records can be produced.
How can I make repeat GR12 purchases easier to verify?
Reference the approved specification and drawing revision, and retain the required delivery condition, testing and documentation provisions. Request identification linking the supplied bar to its material records. Review any changes in diameter, processing or service requirements before repeating the order.
Hot Tags: GR12 Titanium Rods for Chemical Equipment Parts, China GR12 Titanium Rods for Chemical Equipment Parts manufacturers, suppliers, factory
You Might Also Like
Send Inquiry










