
GR12 Titanium Rod for Ships – Machined Round Bar
Bar Dimensions: Diameters of 6–200 mm and lengths up to 3,000 mm, subject to the selected specification.
Production Method: Rolled bar with a machined surface.
Dimensional Requirements: Diameter tolerance, straightness and machining allowance agreed before manufacture.
Intended Use: Starting stock for machined parts in shipboard seawater and auxiliary equipment.
Standards: ASTM B348 or GB/T 2965-2023, with the grade and supplied condition identified.
Minimum Order: 10 kg. Price and packaging depend on bar size, inspection requirements and quantity.
Round Stock for Marine Component Manufacturers
GR12 titanium rod provides solid material for turning, drilling and other machining operations. Potential finished parts include sleeves, spacers, threaded components and equipment fittings where the design specifies this alloy.
The supplied bar is a machining blank. Final dimensions, pressure capability and service suitability belong to the completed component design.
Why Consider GR12?
Small additions of molybdenum and nickel distinguish GR12 from commercially pure titanium. They improve resistance to crevice corrosion in certain hot chloride environments, making the alloy worth evaluating for parts exposed to warm seawater or concentrated saline liquids.
That advantage is relevant to components with close-fitting surfaces or trapped liquid. It does not eliminate the need to assess temperature, water chemistry and the assembled joint.
Define the Material Left After Machining
A machined outside surface helps establish the starting geometry, but it is not necessarily the finished part surface. Specify sufficient stock for the planned machining operations, including any allowance needed to achieve concentric features.
For long, slender parts, state the required bar straightness. For threaded or stepped parts, provide the largest blank diameter and cut length. If a functional surface needs a particular roughness, include that requirement explicitly.
Confirm the Delivery Condition
Mechanical acceptance values must correspond to the ordered bar size, condition and product standard. Any ultrasonic testing, independent inspection or additional material documentation requires an agreed scope.
Please provide the part drawing or blank dimensions when enquiring. Project-specific marine approvals should also be identified before supply; neither the GR12 designation nor a general bar standard establishes approval for a particular shipboard duty.
GR12 Titanium Rod for Ships FAQ
When should GR12 be evaluated for a seawater-contact fitting?
GR12 deserves consideration where warm chloride solutions and restricted circulation around a joint influence material selection. Provide the water chemistry, operating temperature and contact geometry. Include conditions during shutdown, when liquid may remain beneath seals or between mating surfaces.
How do I choose a bar diameter for a stepped or hollow component?
Start with the finished drawing and the machining route. The largest outside feature, internal bore, workholding arrangement and finishing allowance all affect the required blank. Ask the fabricator to establish the starting diameter and cut length before ordering material.
What should I specify for a sleeve with concentric internal and external surfaces?
Provide the finished diameters, wall thickness and concentricity or runout requirements shown on the drawing. Identify any sealing or mating surfaces. The machining plan should establish sufficient stock and a suitable starting condition to produce those features.
Does a machined bar surface meet a finished marine part's roughness requirement?
Confirm the required roughness, dimensional tolerance and permitted surface defects for the specific face. A machined delivery surface may undergo further processing before assembly. State which surfaces will be retained so their acceptance requirements can be agreed in advance.
What inspection details are needed for ultrasonic testing?
Identify the applicable examination standard, acceptance level, coverage and reporting requirements. Include the ordered diameter and any project-specific provisions. Where surveyor attendance or independent verification is required, agree the inspection stages before manufacture.
How should GR12 be specified for a replacement shipboard component?
Reference the approved drawing, original material specification and equipment duty. If GR12 is proposed in place of another material, the responsible engineer should review mechanical requirements, connections and service compatibility. Include any marine approval and documentation requirements in the purchase enquiry.
Hot Tags: GR12 Titanium Rod for Ships – Machined Round Bar, China GR12 Titanium Rod for Ships – Machined Round Bar manufacturers, suppliers, factory
Previous
No InformationYou Might Also Like
Send Inquiry










