GR12 Titanium Alloy Plates – Ti-0.3Mo-0.8Ni
video

GR12 Titanium Alloy Plates – Ti-0.3Mo-0.8Ni

Grade: GR12 titanium alloy. TA10 requirements specified separately for GB/T supply.
Dimensions: Thickness from 0.5 to 50 mm, width up to 2,000 mm and length to order.
Processing Route: Plate rolling or coil-and-strip rolling, selected according to the ordered product.
Appearance: Pickled or bright surface.
Specification: ASTM B265 or GB/T 3621, with the applicable grade and delivery requirements confirmed.
Packaging: Based on plate dimensions, transport arrangements and customer instructions.
Quantity & Price: Minimum order 1,000 kg. Quotation according to size, condition and total quantity.
Send Inquiry
Product Introduction

Material Identity

GR12 is a titanium alloy with small molybdenum and nickel additions. It contains no intentional palladium addition and is a distinct material from both commercially pure titanium and palladium-bearing titanium grades.

Principal element Composition
Molybdenum 0.2–0.4%
Nickel 0.6–0.9%
Titanium Balance, subject to the specified impurity limits

The complete chemical requirements, rather than the nominal alloy name alone, form the basis for material acceptance. GR12 and TA10 should be ordered against their respective standards.

Specify More Than Thickness

Two plates with the same nominal thickness may have different acceptance requirements. A purchase drawing can define the features that matter to the next manufacturing operation:

Flatness where the plate must sit against a fixture or mating surface.

Thickness variation where machining allowance is limited.

Length, width and squareness where several parts will be nested within one plate.

Surface defects and finish where a face will remain exposed or serve a functional purpose.

These details are agreed before production. A bright appearance is not, by itself, a specified surface roughness.

Delivery Condition and Test Results

Mechanical properties depend on the applicable product specification, dimensions and delivery condition. Tensile strength, yield strength and elongation should therefore be stated as order acceptance requirements, supported by the agreed test documentation.

Any ultrasonic examination or independent inspection must also have a defined scope and acceptance basis. Such testing is arranged by agreement rather than assumed for every plate.

Choosing GR12

The alloy is used where a design calls for its combination of fabrication characteristics and corrosion resistance. Its molybdenum and nickel additions can improve performance over unalloyed titanium in certain corrosive environments.

Selection still requires the actual service conditions. The plate designation does not establish a universal temperature range, pressure capability or equipment service life.

GR12 Titanium Plate FAQ

What does Ti-0.3Mo-0.8Ni mean on a GR12 plate order?

The designation describes the nominal molybdenum and nickel additions. Actual composition is accepted within the limits of the specified standard. Include the complete grade designation and standard edition when ordering, then check the supplied chemical analysis against those requirements.

How can I confirm whether GR12 and TA10 meet the same purchase requirements?

Identify the specification stated on the component drawing. If dual-standard compliance is required, both sets of chemical, mechanical and product requirements must be reviewed. Request documentation confirming the agreed compliance rather than relying on a grade-equivalence description alone.

What should I specify when machining several parts from one plate?

Provide the cutting layout or required blank dimensions, together with machining allowances. Thickness variation, flatness and usable edge margins can affect material yield. Identify which faces will be machined and any minimum finished thickness so the starting plate can be selected appropriately.

Can I request a bright finish with a defined surface roughness?

Yes, a roughness requirement can be included for review, but it needs a measurable value and an agreed inspection method. State which faces require that finish and whether further machining will follow. Confirm acceptance criteria before production.

How do I order ultrasonic testing for GR12 plate?

Specify the applicable examination standard, acceptance level, coverage and reporting requirements. Include the plate dimensions and any project-specific inspection provisions. The supplier can then confirm the examination scope and its suitability for the ordered product.

Which material records help with repeat orders?

Retain the purchase specification, drawing revision, delivery condition and inspection requirements. Request heat or batch identification linked to the supplied material report. For a repeat purchase, reference these requirements explicitly so changes in dimensions, standards or testing can be identified before manufacture.

Hot Tags: GR12 Titanium Alloy Plates – Ti-0.3Mo-0.8Ni, China GR12 Titanium Alloy Plates – Ti-0.3Mo-0.8Ni manufacturers, suppliers, factory

Send Inquiry

whatsapp

Phone

E-mail

Inquiry