GR1 Titanium Wire for Bending and Forming
Product Specification: ASTM B863 or GB/T 3623, according to the order.
Size and Process: Drawn wire in diameters of 0.2–8.0 mm, with custom lengths available.
Finish: Pickled or bright surface.
Delivery Form: Coils of 5–20 kg or straight lengths of 500–1,000 mm. Other requirements by agreement.
Uses: Formed wire parts, woven products and corrosion-resistant fabrication. Welding use requires a confirmed filler-metal specification.
Packing: Arranged according to wire size and customer requirements.
Order Quantity: From 10 kg, with pricing based on dimensions, processing and quantity.
Working with GR1
A wire part may need several bends before it reaches its final shape. For this type of work, GR1 offers the ductility associated with low-oxygen commercially pure titanium. In the annealed condition, it is generally easier to cold-form than GR2. Its appeal is formability rather than high tensile strength.
Annealing and subsequent drawing affect the balance between strength and elongation. If the wire will be wound, bent or woven, identify that operation when specifying the delivery condition. A tight bend or a dimension that must be held after forming is best defined on the part drawing.
Where the Wire Fits
Possible uses include bent wire components and woven structures for industrial equipment. For chemical or marine exposure, assess the actual fluid and temperature before choosing the material. Acid service requires particular attention to concentration and temperature.
The Wire We Supply
Diameter 0.2–8.0 mm. Coils 5–20 kg. Straight wire 500–1,000 mm, with other lengths by agreement. Pickled and bright surfaces are available. State any diameter tolerance, straightness or surface requirement that affects your equipment or finished part.
Orders specify ASTM B863 GR1 or GB/T 3623 TA1, with the applicable edition and material condition agreed before production. Wire is cleaned and vacuum sealed in moisture-resistant packaging. Additional testing and inspection documents are confirmed with the order.
For welding, confirm the filler-metal classification separately. Medical equipment and implant-related uses require their own applicable material and acceptance specifications.
GR1 Titanium Wire FAQ
When is GR1 a practical choice for formed titanium wire parts?
GR1 is worth considering when the manufacturing process requires substantial bending, winding or shaping and the component design permits its relatively low strength. Its ductility can be valuable for complex wire geometries. Selection should account for the finished part's loading requirements as well as the deformation needed during production.
Can I substitute GR1 wire for GR2?
A substitution requires review of the drawing and material specification. GR1 generally offers greater formability, while GR2 provides higher strength. Check the required tensile properties, final geometry and operating loads before changing grades. For an existing approved component, obtain the appropriate engineering acceptance before placing an alternative material order.
Will annealed GR1 wire hold its shape after bending?
The result depends on wire diameter, bend radius, material condition and tooling. Annealing improves formability, but dimensional accuracy still requires control of springback and the forming operation. If the part must meet a tight final profile, provide the drawing and permissible dimensional variation so the starting wire requirements can be established.
What happens to GR1 wire during repeated cold working?
Drawing and forming can increase strength while reducing the ductility available for subsequent operations. For a part requiring several stages of deformation, describe the full sequence when specifying the wire condition. Depending on the process, intermediate annealing may need to be evaluated by the fabricator.
How should straight GR1 wire be specified for accurate positioning?
Include diameter tolerance, cut-length tolerance and straightness requirements. Identify any end condition or surface feature that affects placement in a fixture. These details are particularly useful when short wire sections must align with small holes or repeat the same position during assembly.
Does low oxygen content guarantee suitability for corrosive service?
Low oxygen content contributes to GR1's mechanical characteristics. Corrosion suitability also depends on the medium, temperature, contaminants and component configuration. Provide the actual exposure conditions, including cleaning fluids, when requesting material selection for chemical or seawater service.
Hot Tags: GR1 Titanium Wire for Bending and Forming, China GR1 Titanium Wire for Bending and Forming manufacturers, suppliers, factory
You Might Also Like
Send Inquiry











