GR5 Titanium Electrode Rods for 3D Printing Powder Production

GR5 Titanium Electrode Rods for 3D Printing Powder Production

Feedstock Alloy: GR5 / Ti-6Al-4V, with TC4 chemistry requirements identified for GB/T orders. Powder-Making Routes: Electrode feedstock for PREP or EIGA, subject to the equipment manufacturer’s requirements. Rod Dimensions: Diameter 50–70 mm and length up to 1,000 mm; other sizes by agreement. Processing & Surface: Rolled rods with a machined exterior. Turning or grinding requirements are confirmed against the electrode drawing. Surface Roughness: Ra ≤1.6 μm when specified and confirmed in the order. Chemistry Control: Oxygen, nitrogen and other elemental limits agreed against the intended powder specification. Standards: ASTM B348 where applicable to the supplied bar; GB/T 3620.1-2016 for the specified titanium grade and chemical composition. Minimum Order: 1,000 kg. Pricing and protective packaging depend on electrode dimensions, testing and quantity.
Send Inquiry
Product Introduction

Start with the Powder Specification

GR5 electrode rods provide pre-alloyed Ti-6Al-4V material for conversion into metal powder. Unlike rods purchased for mechanical components, this feedstock is selected primarily around chemistry, cleanliness and compatibility with the powder-production equipment.

The powder producer should define the required composition before the electrode order is finalized. Oxygen and nitrogen limits may need to be tighter than general bar requirements to accommodate the intended powder grade and potential pickup during processing.

Compliance with a GR5 bar specification alone does not establish that the resulting powder meets an aerospace, medical or additive-manufacturing specification.

Match the Electrode to the Machine

PREP and EIGA use rod electrodes through different melting and powder-forming mechanisms. An electrode suitable for one installation should not be assumed compatible with another.

For EIGA, the rod is melted progressively by induction and the resulting liquid stream is broken into droplets by inert gas. Electrode dimensions must suit the feeding and melting arrangement.

Supply the equipment drawing with the enquiry, including diameter tolerance, straightness, end preparation and gripping features. These details take precedence over a generic claim of compatibility with "mainstream" atomization systems.

Agree How the Feedstock Will Be Verified

The purchase specification should establish chemical sampling, required analysis and any internal-soundness examination. Melting history and heat identification should also be included where required by the customer's quality system.

Multiple melting operations do not, by themselves, prove the absence of segregation or inclusions. Acceptance must rely on the agreed inspection evidence.

Finished-powder characteristics-including particle-size distribution, morphology, flowability and final chemistry-require separate validation after atomization. The electrode is the starting material, not a guarantee of powder yield or finished-part performance.

 

Hot Tags: GR5 Titanium Electrode Rods for 3D Printing Powder Production, China GR5 Titanium Electrode Rods for 3D Printing Powder Production manufacturers, suppliers, factory

Send Inquiry

whatsapp

Phone

E-mail

Inquiry