GR1 Titanium Plates – Commercially Pure Titanium for Forming
video

GR1 Titanium Plates – Commercially Pure Titanium for Forming

Grade Selection: GR1 commercially pure titanium; TA1 supplied to the designated GB/T requirements. Available Range: 0.3–50 mm thickness, widths up to 2,000 mm and customer-specified lengths. Manufacturing: Rolled sheet and plate, with the processing route matched to the requested dimensions. Finish Options: Pickled or bright surfaces. Fabrication Focus: Material for pressed, drawn and bent components where ductility is a priority. Supply Specification: ASTM B265 or GB/T 3621, with the grade and product condition defined in the order. Purchase Details: Minimum quantity 1,000 kg. Packing and price are quoted against the selected dimensions and delivery requirements.
Send Inquiry
Product Introduction

When the Shape Drives Material Selection

A shallow curve and a deeply formed profile place different demands on a titanium blank. GR1 is often considered when the manufacturing challenge is to obtain the required shape while retaining adequate ductility.

Among GR1–GR4 commercially pure titanium grades, GR1 has the lowest strength and greatest room-temperature formability. Its low oxygen content is central to this balance. It is a forming-oriented choice rather than a high-strength substitute for GR5.

Applications That Use This Advantage

Pressed heat-exchanger sheets are one example of a product that benefits from formable titanium. Other candidates include drawn covers and contoured process-facing panels, provided the design and operating conditions support the material choice.

These examples describe downstream uses of the flat material. Pressing, drawing or finished-part manufacture is included only when expressly agreed.

For substantial deformation, the enquiry should describe the intended profile, local radii and expected thinning. Trial forming may be needed to establish the tooling and production sequence; a material grade alone cannot guarantee a particular draw depth.

Retain the Required Properties After Forming

Cold work changes the material's strength and ductility. If several forming stages or intermediate heat treatments are planned, the starting condition should be selected with that sequence in mind.

Final component acceptance may involve dimensions, minimum remaining wall thickness and surface condition as well as material test results. These requirements should be distinguished from the acceptance criteria for the incoming sheet or plate.

GR1 also offers corrosion resistance in many industrial environments. Chemical compatibility must be checked for the actual service, including cleaning and shutdown conditions.

 

Hot Tags: GR1 Titanium Plates – Commercially Pure Titanium for Forming, China GR1 Titanium Plates – Commercially Pure Titanium for Forming manufacturers, suppliers, factory

Send Inquiry

whatsapp

Phone

E-mail

Inquiry