Nov 13, 2026 Leave a message

Can Handheld XRF Identify Grade 23 Titanium? Testing Limits

Can Handheld XRF Distinguish Grade 5 from Grade 23 Titanium?

A handheld XRF test on a titanium bar detects aluminum, vanadium, and other elements. The instrument's grade match points to Ti-6Al-4V. Does that confirm the material is Grade 23?

Not on its own. The information is useful, but it may not cover the elements needed to distinguish the two grades.

For Grade 5 and Grade 23, verification goes beyond detecting aluminum and vanadium. It also involves elements that conventional handheld XRF cannot measure directly.

Similar Aluminum and Vanadium Levels Do Not Mean Identical Requirements

Grade 5 generally refers to Ti-6Al-4V, while Grade 23 refers to Ti-6Al-4V ELI. Both are titanium-aluminum-vanadium alloys, with substantial overlap in their permitted major alloying-element ranges.

ELI stands for extra low interstitial, and oxygen is one of the elements that requires attention. TIMET's published data sheet, for example, lists the following composition limits:

Comparison Grade 5 Grade 23
Maximum oxygen content, weight percent 0.20% 0.13%

These values illustrate the difference; they are not test results for a particular batch. Acceptance must follow the applicable product standard, edition, and contractual requirements. TIMET's alloy data sheet also lists requirements for nitrogen, iron, hydrogen, and other constituents.

Aluminum and vanadium readings within the overlapping ranges therefore provide only part of the chemical evidence. They do not establish that the oxygen content meets Grade 23 requirements.

Conversely, a batch supplied as Grade 5 cannot be reclassified as compliant with Grade 23 solely because its measured oxygen content is below 0.13%. The remaining applicable requirements still need to be checked.

Handheld XRF Cannot Measure Some of the Critical Elements

XRF stands for X-ray fluorescence. With suitable instrument configuration, calibration, and testing conditions, it can provide information on elements such as aluminum, vanadium, and iron in titanium alloys, making it useful for on-site composition screening.

Conventional handheld XRF cannot directly measure very light elements such as oxygen, nitrogen, and hydrogen. Evident explains these limitations in its handheld XRF technical FAQ.

Longer test times or additional measurement locations will not produce an oxygen measurement when that element is outside the instrument's analytical capability.

The grade name displayed on the screen must also be interpreted in light of the elements actually measured. Where two grades have similar major metallic constituents but different light-element requirements, a grade-match label alone is incomplete evidence.

If oxygen is absent from a report, that report provides no oxygen result. The omission does not mean the oxygen content is zero or that it complies with the specification.

What Additional Testing Is Needed for Interstitial Elements?

Testing should be selected around the question that needs answering. To verify oxygen, nitrogen, or hydrogen, the method must suit those elements, the titanium-alloy matrix, and the relevant concentration ranges.

Inert gas fusion, for example, can be used to determine these gas elements. LECO's oxygen, nitrogen, and hydrogen analyzer information describes the analytical principle and its application to titanium and other materials.

A general request for "spectrometer testing" is therefore insufficient. A clearer requirement identifies the elements to be measured, applicable methods, limits, and reporting requirements, allowing the laboratory to confirm whether its capabilities cover the work.

For incoming inspection of titanium bar, plate, or forgings, handheld XRF can screen major alloying elements. Light-element results can then be reviewed or supplemented according to the order requirements. Whether retesting is needed, how samples are taken, and how frequently testing is performed should follow the applicable specification and agreed inspection plan.

Handheld XRF is valuable because it quickly provides information on the elements it can measure. When purchasing Grade 23, the more useful question is where the evidence of interstitial-element compliance comes from-not simply whether a familiar grade name appears on the screen.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry